Installation; Installing Your Television Set; The Keys On The Tv Set - Philips 21PT5401 Mode D'emploi

Masquer les pouces Voir aussi pour 21PT5401:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15

Installing your television set

Positioning the television set
&
5 cm
Place your TV on a solid, stable surface,
leaving a space of at least 5 cm around the
5 cm
appliance. To avoid accidents, do not put
5 cm
anything on the set such as a cloth or cover,
5 cm
a container full of liquid (vase) or a heat
source (lamp). The set must not be exposed
to water.
Connections
é
FM.
ANT.
or
• Insert the aerial plug into the : socket at
the rear of the set.
• For the versions equipped with a radio:
insert the radio aerial socket into the FM
ANT socket using the adapter supplied.
If you are using an indoor aerial, reception may
be difficult in certain conditions. You can improve
reception by rotating the aerial. If the reception
remains poor, you will need to use an external
aerial.
• Insert the mains plug into a wall socket (220-
240 V / 50 Hz).

The keys on the TV set

The television set has 5 keys which are located
on the front or the top of the set depending
on the model. The on/off key switches the TV
set on/off.

5 cm
5 cm
5 cm
5 cm
5 cm
FM.
ANT.
FM.
ANT.
5 cm
Remote control
"
Insert the two R6-type batteries (supplied)
making sure that they are the right way round.
Check that the mode selector is set to TV.
The batteries supplied with this appliance do not
contain mercury or nickel cadmium. If you have
access to a recycling facility, please do not discard
your used batteries (if in doubt, consult your
dealer). When the batteries are replaced, use the
same type.
Switching on
'
To switch on the set, press the on/off key.
A red indicator comes on and the screen
lights up. Go straight to the chapter Quick
installation on page 5.
If the television remains in standby mode,
#
press P
on the remote control.
The indicator will flash when you use the remote
control.
The VOLUME - + (-
to adjust sound levels. The PROGRAM - +
(- P + or - +) keys are used to select the
required programmes. To access the menus,
simultaneously hold down the
+ keys. The PROGRAM - + keys may then be
used to select an adjustment and the -
keys to make that adjustment.
To exit from the menus, hold down the 2
"
- and
+ keys.
Note: when the Child Lock function is activated,
these keys are unavailable (refer to
menu on page 8).
5 cm
5 cm
FM.
ANT.
FM.
ANT.
"
+) keys are used
"
"
- and
"
+
"
Features

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

21pt5421

Table des Matières