Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Do not touch any moving parts of the machine and always wait for it to stop.
•
During operation, objects such as spoons, dough scrapers or your hands must never
touch the rotating whisks or dough hooks! Caution - risk of injury!
•
Before changing the attachments, the appliance must be disconnected from the mains!
•
In order to avoid splashing, always insert the rods fully into the food being mixed before
you switch the mixer on.
•
Only mix or whisk food with this machine.
•
Do not operate the mixer for more than 5 minutes! Then let it cool down for approximate-
ly 10 minutes before using it again!
•
The device is only designed for small quantities! You should therefore only fi ll the
maximum quantities stated in the table into a container!
1 Mains lead
2 5-position switch
3 EJECT button
4 Mixer
•
Ensure that the machine is not connected to the mains.
•
Before initial use we recommend that the dough hooks and whisks should be cleaned in
soapy water.
Assembly of the Kneading Hook/Beater
Press the two whisks and dough hooks lightly on the bottom until they lock into place.
Warning:
The dough hook marked with the ring has to be inserted into the opening (7) of the mixer
that is marked "dough hook"!
It does not matter which whisk is inserted into which opening.
05-HM 350 CB 39
Special Safety Instructions for this Machine
Overview of the Components
Initial Operation
5 Beater
6 Kneading hook
7 Opening for the marked
kneading hook
GB
39
19.09.2007, 12:32:11 Uhr
Publicité
Table des Matières
