Cleaning After Each Use - Conrad Electronic 84 09 69 Notice D'emploi

8. Cleaning After each Use

• Remove the water tank from the oral irrigator. Open the lid and empty
possible residual water.
• Hold the aperture at the tip of the plug-in nozzle into the washbasin.
Switch the oral irrigator on for a few seconds via the ON/OFF switch
and activate the water jet.
Thus, the pump and the hose are emptied completely to
prevent contamination of bacteria and calcification.
• Dry the components of the oral irrigator e.g. by means of a clean towel.
• Insert the handle through the hose spiral into the holder of the oral
irrigator.
Disconnect the mains plug from the mains socket.
28