Manual Configuration As An Access Point - Eminent EM4543 Mode D'emploi

4. Select the network you want to connect to and click 'Connect'.
5. If correct, Windows will now ask you to fill out your wireless security key. Also,
the lower part of the screen shows you to push the WPS button on the router.
6. Press the WPS button on the Eminent router for approximately 1-2 seconds (not
longer!).
7. Press the WPS button on your wireless WPS adapter. Refer to the manual of
your wireless WPS adapter for the exact amount of time you need to press the
WPS connection.
8. The connection between the Eminent router and your wireless WPS adapter will
be established automatically. The following icon will be visible in the
taskbar: . This icon tells you an internet connection has been established.
You will now be able to access the internet.
Hint: The WPS button also acts as a reset button. If you press the WPS button too
long, (for example: 8~10 seconds), the Eminent router will be set back to factory
defaults.
Hint: Some WPS adapters and Windows versions require you to use the supplied
WPS adapter software. If so, the steps described above can differ from your own
situation. Please refer to the manual of the wireless WPS adapter for the exact steps.

5.0 Manual configuration as an Access Point

Install the router as an access point if you have a router or DSL modem router. Make
sure that your Internet browser and your network are well configured when configuring
manually. You can assume that the settings are correct, unless you have changed any
of the settings in the past.
10 |
ENGLISH