Remington MB4850 Mode D'emploi page 5

ENGLISH
SETTING
1 Stubble or Cropped look
2
3 Short
4
5 Medium
6
7
8
9 Long
• Slowly slide the trimmer through the hair. Repeat from different directions as
necessary.
• If hair builds up in the trimmer comb during the trimming process, switch
the unit off, pull off the comb and brush off.
Note: Use the beard trimmer without the adjustable comb for trimming hair
close to the skin. This will trim hair to 1mm, holding the blades
perpendicular to the skin will trim hair to 0.4mm.
, ATTACHING AND REMOVING THE BLADES
• To remove, press the release button and pull upwards and away from the
trimmer.
• To attach, snap the desired blade in place until it clicks.
• The detail blade is designed for edging and the stubble blade is intended for
short stubble. Both of these combs are not recommended for use with the
adjustable comb. The main blade can be used for trimming beards with or
without the adjustable comb.
, TO THIN AND TAPER THE BEARD/MOUSTACHE
• Turn the unit on.
• Place the flat top of the trimmer comb against the skin.
• Slowly slide the trimmer through the hair. Repeat from different directions as
necessary.
• If hair builds up in the trimmer comb during the trimming process, switch
the unit off, pull off the comb and brush off.
HAIR DESCRIPTION HAIR LENGTH
1.5mm 0.06''
2.5mm 0.1''
4mm 0.16''
5.5mm 0.22''
7mm 0.28''
9mm 0.35''
11mm 0.43''
14mm 0.55''
18mm 0.71''
5