Publicité
Les langues disponibles
Les langues disponibles
Note on CD-R/RW discs
- Because of non-standardized format definition/ production of CD-R/RW,
playback quality and performance are not guaranteed.
- Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions, such as PC performance,
writing software, media ability, etc.
- Do not attach a seal or label to either side of the CD-R/RW disc. It may cause a malfunction.
- It is recommended to record only audio files on CD-R/RW discs for easy reading.
PROGRAM CD
FOR NORMAL COMPACT DISC PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order. Up
to 20 tracks can be programmed.
1.
Press the " PROGRAM/CLOCK-ADJ. " button.
2.
Press the
3.
Press " PROGRAM/CLOCK-ADJ. " button again to memorize the track.
4.
Repeat steps 2 and 3 until all desired tracks are programmed.
5.
Press the " PLAY/PAUSE " button to start. " PROGRAM " is shown on
the CD display.
6.
Press " STOP " button to stop programmed playback.
7.
Press " PROGRAM/CLOCK-ADJ. " and " PLAY/PAUSE " buttons to resume
programmed playback.
8.
Turn off the CD player to clear the programmed memory.
Note : Programming can only be made when the player is in stop mode.
MAINTENANCE
CLEANING CD
If the CD skips or will not play , the disc may need cleaning
. Before playing, wipe the disc from the center outward with a
cleaning cloth. After playing, store the disc in its case.
CLEANING THE CD LENS
If the CD lens is dusty, clean it with a brush-blower. Blow
several times on the lens and remove the dust with the
brush. Finger prints may be removed with a cotton swab
moistened with alcohol.
CD1F CD BIGBEN ENGLISH IM NO REM6 6
skip buttons to select the desired track number.
GB 4
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean by lightly
wiping with a soft cloth.
IMPORTANT NOTE
If an abnormal display indication or an operating problem
occurs, disconnect the AC power cord. Wait at least 5
seconds, then reconnect the AC power cord.
WARNING
Should the CD door be opened before the reading of the CD
is completed, a jamming noise may occur. This is resolved
by closing the CD door.
CD display
2010/2/2
12:21:56
Publicité
