Reviewing Recent Alerts; Alert Test; Set Channel/Volume - Midland WR120 Guide Du Propriétaire

WR-120 Owner's Manual

Reviewing Recent Alerts:

The WR-120 All Hazards Weather Alert Radio can store up to 10 different
Weather/Hazard alerts. You can review all alerts still in effect by pressing
to scroll through the active alert memory on your weather radio. A double
beep indicates the end of the list. "NO MESSAGE" will be displayed if no
alerts are active.

Alert Test:

MENU
1. Press to open menu options.
▲
to scroll through menu to ALERT TEST.
2. Press
SELECT
3. Press to sound the alert siren.
MENU or SNOOZE
4. Press
mode.
Note: Ensure ON/OFF switch is in the ON position.

Set Channel/Volume:

MENU
1. Press to open menu options.
▲
2. Press to scroll through menu to SET CHANNEL then press
3. *Tune the channel to the desired broadcast by using
Find the channel for your area by visiting http://www.nws.noaa.gov/nwr/
nwrbro.htm and reviewing the corresponding frequency and channel for
your area using the chart below.
4. **Adjust the volume to a comfortable level by using
VOLUME DOWN
MENU
5. Press to exit menu mode.
* Press the ► button scan to the next channel available channel
**Ensure ON/OFF switch is in the ON position
Channels Preset on the
Weather Radio
page 7
to silence the siren then press MENU exit menu
.
1
2
3
4
5
6
7
▲
or
VOLUME UP
Broadcast Frequency
(MHz)
162.400
162.425
162.450
162.475
162.500
162.525
162.550
www.midlandusa.com
▲
SELECT
.
▼
.
or