Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
STEP :: 03
CALIBRATING THE COMPASS
NOTE: Always calibrate the compass outdoors. Hold the compass level and away from objects that may
generate magnetic fields, such as cars or buildings.
From the main menu, select COMPASS > CALIBRATE. The COMPASS screen appears.
1.
2. Rotate the Handheld Device 2-3 times in all three dimensions as shown below. Rotate until the black
indicators are as close as possible to the center of the green zone. If successful, your Handheld Device will
beep and vibrate as well as display a message that says "CALIBRATION DATA HAS BEEN
UPDATED SUCCESSFULLY".
NOTE: If you are unable to get the compass to automatically update your calibration data, follow the
remaining steps.
3. Rotate until the black indicators are as close as possible to the green zone and press the Menu Selection
Pad to continue.
4. At the prompt "DO YOU WANT TO SAVE THE NEW CALIBRATION DATA?" press the arrow keys to select YES.
5. Press BACK (top-right button on the Handheld Device) to return to the main menu.
NOTE: To set your magnetic declination angle to avoid inaccurate compass readings, refer to
your Operating Guide.
STEP :: 04
PAIRING THE GPS COLLAR OR GPS COLLAR WITH E-COLLAR MODULE TO
THE HANDHELD DEVICE
Your system will already be paired when you get it, but in the event you need to pair the Handheld Device to the
GPS Collar or GPS Collar with E-Collar Module, follow the steps outlined in Step 3 of your Operating Guide.
STEP :: 05
FIT THE GPS COLLAR OR GPS COLLAR WITH E-COLLAR MODULE
Put the collar around your dog's neck and adjust to find the proper fit, making sure the GPS antenna is at
the back of your dog's neck for best reception. Fasten the collar so the fit is snug yet loose enough to allow
one finger to fit between the strap and the dog's neck. Fit is important because a loose collar may cause
inconsistent performance.
SPORTDOG.COM
5
Publicité
Chapitres
Table des Matières
