maniquick MqPerfect MQ160 Mode D'emploi page 54

Memory:
• Auto-Display the last measured temperature
• 30 readings recall in the Memory Mode
Backlight:
• The display light will be GREEN for 4 seconds, when the unit is turned ON.
• The display light will be GREEN for 5 seconds, when a measurement is
completed with a reading less than 37.5 °C (99.5 °F).
• The display light will be RED for 5 seconds, when a measurement is
completed with a reading equal to or higher than 37.5 °C (99.5 °F).
Operating temperature:
Body Mode: 16-40,0 °C (60,8-104,0 °F)
Object Mode: 5-40,0 °C (41-104,0 °F)
Storage temperature:
-20 °C - +50 °C (-4 °F - 122 °F)
15-95 % relative maximum humidity
Automatic Switch-off: Approx. 1 minute after last measurement has been
taken.
Battery: CR2032 Battery (X1) 3V - at least 1000 measurements
Dimensions: 120 x 28 x 21 mm
Weight: 39 g (with battery), 36 g (w/o battery)
Reference to standards: ASTM E1965; IEC 60601-1; IEC 60601-1-2
(EMC); IEC 60601-1-11
This device complies with the requirements of the Medical Device Directive
93/42/EEC. (Class IIa)
Technical alterations reserved.
According to the Medical Product User Act a biennial technical inspection
is recommended for professional users.
Please observe the applicable disposal regulations.