Introduction - Oki Data Microline 3320 Manuel De L'utilisateur

There are single and dual bin versions for both the narrow and wide Cut-
Sheet Feeders. The narrow ones, which are normally used for the 80
column printer ML 3320 and ML 3390, can also
column printers ML 3321 and ML 3391 by adjusting the mounting bracket.
The dual bin CSF allow you to select one of two feeder slots; so you have
software controlled access to two different forms.
Refer to the following table:
1) Mounting bracket must be extended before installation. See page 12.
Although most pictures in this manual show the narrow single bin version
CSF, the handling of the other models is very similar.
When mounted on your MICROLINE 3320, 3321, 3390 or 3391 printer, the
Oki CSF automatically feeds sheets of standard A4 paper, business letter-
head and single part forms into the printer. Once each sheet has been
printed, the CSF will eject it and insert a new one automatically until the
entire file is printed. This means that you can print your long word-
processing files, reports or programs on high quality, single-sheet paper ...
no more tedious separation of endless fanfold paper printouts! Multiple
form letters can be printed automatically on letterhead stationery, without
your having to hand feed the paper into the printer.
Not only that, but your Cut-Sheet Feeder offers the versatility of operation
on any of four different printers. Just a few simple steps extend its adjust-
able mounting bracket to fit the wide carriage models. What's more, the
CSF is quick and easy to set up an operate. Once you've use it, you might
wonder how you ever survived without it!

INTRODUCTION

be
installed on the 136