Loading Paper - Oki Data Microline 3320 Manuel De L'utilisateur

Loading Paper

1. Flex the paper stack [not more than 170 sheets of 60 g/m
paper] by grasping both ends of the paper into a U-shape. Square the
stack again, turn it over, and repeat the flexing. Flexing the paper
loosens the sheets for better feeding.
A stack of paper is limited to 16 mm in total thickness. For B4 or larger
sheets the total thickness should be reduced to less than 10 mm.
2. Insert the paper stack in the hopper, then push it against the left paper
guide.
3. Ensure that the bottom corners of the paper stack are inserted under
friction rollers.
2. OPERATION
2
(16 pound)