Connecting Using Es-Link Analog - Esoteric Grandioso M1X Mode D'emploi

Connecting using ES-LINK Analog

ES-LINK Analog overview
The current transmission method utilizes the performance of HCLD buffer circuits that feature the ability to supply strong current at
high speed. This suppresses the impact of impedance on signal paths, enabling pure and powerful transmission of signals.
o Ordinary balanced cables (with XLR connectors) are used for connection.
These connectors can only be used with compatible devices, however, because the transmission format is unique.
Connecting to a preamplifier using ES-LINK Analog
Use an XLR cable to connect the analog audio output (ESL-A) connector of a preamp to the ES-LINK Analog input (ESL-A) connector on
this unit.
o Set the input selection switch on this unit to ESL-A.
o Normal XLR and RCA connections are also possible. Select the connection type that provides the audio quality you prefer.
ATTENTION
The ESL-A input connector of this unit is a male-type connector to prevent accidental connection by mistaking it for the XLR input
connector.
10
Preamplifier
Analog audio output (ESL-A)
connectors