Hardware Overview; Status Indicators; Battery Status - BullFrog Kicker BF400 Manuel D'utilisation

Status Indicators

The KICKER BF400 uses light indicators to acknowledge changes in settings, modes,
and input response If no action can be taken, such as decreasing volume when at minimum,
or pressing FWD/BACK while in AUX mode, there will be no response

Battery Status:

Battery status is indicated with 5 white LEDs on top of the BF400, above the PLAY/PAUSE
button These LEDs will also indicate Double-Kick mode (see
status, press any button while the BF400 is powered on Status display will end after
5 seconds Remember to charge the BF400 for 6 hours before first use Charging is complete
when Battery LEDs stop counting and turn off
BATTERY STATUS LEDs (1-5)
All Solid
4 Solid
3 Solid
2 Solid
1 Solid
1 Blinking
Counting Up
Input Status:
Audio input status is indicated with one of three colored LEDs, located next to the
SOURCE/PAIRING button These LEDs will change color with the source:
Bluetooth - Blue
LED status indicators:
• illuminated when the BF400 is powered on
• solid when input source is set
• flashes blue when in Bluetooth pairing mode
• blinks when receiving commands
• breathes slowly when audio is paused or muted
3
>80%
60%–80%
40%–60%
20%-40%
<20%
<10%
Battery Charging
FM Radio - Red
Page 4) To show current battery
Auxiliary Input - Green
}
AUX