Petromax Loki Mode D'emploi page 5

Figure 2
2. Secure the inner ring with the washer and
nut at the first bolt.
3. Then you will need to secure all the remai-
ning washers and nuts.
4. Afterwards, you will need to cut the big hole
ino the canvas from the inside, by using the
inner circle of the ring as a template. In order
to avoid damaging the silicone collar during
cutting we recommend that you cut the hole
into the canvas by means of the outer ring
only without the silicone collar being atta-
ched (Figure 3).
Figure 3
5. You can now position your Loki Stove under
the tent kit and push the flue through the
silicone collar. (Figure 4) From the outside,
you can install the outer flues and spark arre-
stor. You are now ready to ignite your Loki.
Figure 4
DISCLAIMER
Petromax accepts no responsibility for the
use or misuse of the Loki or tent kit. We only
recommend it for use with the Loki in a fire-
retardant canvas such as Bell tent, Tipi or yurt.
It is the customer's responsibility to ensure the
shelter used has the appropriate fire retardant
qualities necessary. We advise not to leave the
Loki unattended in the shelter and to make
sure it has been extinguished prior to going to
sleep. Always make sure the Loki is positioned
on a fireproof surface to prevent sparks going
straight through your ground sheet. Petromax
does not accept any liability to any party for
loss or damage incurred by use of the Loki or
tent kit howsoever caused.
SUPPORT
If you have questions or if you need addi-
tional information, please let us know. You
can contact our support team via email at:
service@petromax.de
5