A.I.&.E Montreal RO2716-48Z Manuel D'utilisation page 7

Installation
Please be aware: that no products should be sealed against the wall/opening as
this can effect the performance of the heater unit.
Minimum Installation Height:
From floor level to bottom edge of product, Minimum 300mm.
This suite is supplied with a wall fixing Bracket.
The suite can be installed at any height as long as it is not below the
recommended 300mm. (Please note the 700mm measurement is given as a
common installation height).
The recommended installation height is a minimum of 300mm from the floor level
to the underside of the hearth.
Warning: Installing this product below 300mm will
cause overheating issues.
The suite is designed as a wall mounted suite; it is
not suitable to be installed at floor level.
Installation:
This model is provided with a wall mounting bracket along with x5 screws and
wall plugs.
PLEASE NOTE: The screws and plugs provided are only suitable for a solid wall
fixing. If the installation is onto a hollow/stud wall, we recommend that heavy
duty wall anchors or equivalent are used.
7