A.I.&.E Montreal RO2716-48Z Manuel D'utilisation page 10

Note: the working state of the time period is the same as that before start timer
function. That is to say, adjust the working state you want and turn on the timer
function, then the machine will work according to your working state in the
time period.
: For flame function - Press this button to turn on the flame.
Press again to turn off.
: For flame effect function - Press this button to change flame effect.
Press again to decrease the flame intensity. There are 4 light intensities for your
selection. The flame optics will go lower under the sequence of 4,3,2 and 1.
Pressing the button again will go higher under the sequence of 1,2,3 and 4.
NOTE: After the display screen is extinguished, it can be activated by any key.
NOTE: In the absence of timing mode, you can press
desired temperature directly. When desired ambient temperature is reached, the
heater will automatically stop heating.
Fast Menu
:
Press the standby button and the heating button, the unit can heating
immediately.
10
or button to the