Akai AM-301W Manuel D'utilisation page 28

SETTING & BASIC OPERATION
Standby
To turn on the micro system, press the button on front panel of the unit or on the remote
control. Press the button again to turn off the micro system
SOURCE BUTTON
Press the SOURCE button repeatedly to switch among CD/TUNER/LINE IN /BT modes. To
select the USB mode please select the CD MODE and press CD/USB button on remote control to
switch into USB mode.
MUTE Button (On Remote Control Only)
1. You can also press the MUTE button on the remote control to turn off the sound temporarily, for
example, when answer the telephone.
Press the MUTE button again to cancel the mute function and restore the sound.
2. The mute function will also be cancelled automatically by pressing the VOLUME + or –
buttons.
VOLUME LEVEL
Turn the VOLUME knob on front panel or press VOL +/ VOL - buttons on remote control to adjust
the volume level.
LOUDNESS
Press LOUDNESS button to enhance the bass level immediately when bass is not enough.
FUNCTION
Press successively the FUNCTION button to adjust VOLUME, BASS and TREBLE at your
convenience. Press FUNCTION once if you want to adjust the volume, twice to adjust the bass and
3 times to adjust the treble.
CD / MP3 OPERATION
MP3, CD-R. Please do not try to play
You can play in your Micro System your audio CD and
CD-ROM, CD-I, VCD or DVD.
1. Open the disc tray by pressing OPEN/CLOSE button on the unit or on the remote control.
2. Insert the CD with the printing side facing up and close gently the disc tray by pressing again
OPEN/CLOSE.
3. Press SOURCE button to select the CD MODE.
4. Press to start the CD playback; for AUDIO CD, playback starts automatically.
„
5. Press stop button on unit or on remote control to stop playback.
Searching for a section within a CD (On Remote Control Only).
/
During playback, press and hold on the remote control to find a specific passage within the
track and release it at the point you want to listen to.
26