Publicité
Les langues disponibles
Les langues disponibles
QUICK CONFIGURATION GUIDE DT-421D
2. SAFETY RULES
2.1
General
∗
The safety could not be assured if the instructions for use are not
closely followed.
∗
Use only with other DT series modules and for power supply and Control
those indicated at the Specifications.
∗
Remember that voltages higher than 70 V DC or 33 V AC rms are
dangerous.
∗
Use this instrument under the specified environmental conditions.
∗
The user is not allowed to perform changes inside the equipment. Any
change on the equipment must be done exclusively by specialized staff.
∗
Do not obstruct the ventilation system of the equipment.
∗
Use appropriate low-level radiation cables for input / output signals,
especially on high level signals.
∗
Follow
the
paragraph.
∗
Symbols related with safety:
07/2012
cleaning
instructions
described
in
the
Maintenance
Page 5
Publicité
