Pc Settings - Furrion FEHD19S0A Manuel D'instructions

Change Settings

PC Settings

The PC menu is only accessible when a PC is connected to the TV via the VGA connection.
NOTE: After connecting a PC, press
1. Press MENU button, the setup window will appear on the screen.
2. Use keys to highlight Setup mode.
or
to highlight Advanced, then press OK
3. Use or
4. Use or to highlight the item you would like to reset, then press
settings.
5. Press MENU to return to the previous menu or press EXIT at any time to exit the setting.
H-Pos Configures the horizontal position of the TV image.
V-Pos Configures the vertical position of the TV image.
Clock
Adjusts the pixel Clock (vertical )for a clearer image.
Phase Adjusts the phase Clock (horizontal) for a clearer image.
Auto
Automatically adjusts the PC settings.
PC MONITOR DISPLAY MODES
Mode Resolution
VGA 640 x 480
VGA 720 x 400
VGA 1366 x 768
SVGA
800 x 600
XGA 1024 x 768
*Please note on non FHD TVs some functionality may be limited.
25
button and select PC. Press OK
SOURCE
Time Menu
Refresh Rate
60/75 Hz
70 Hz
60Hz
60/75 Hz
60/70/75 Hz
to enter the sub menu.
or
Press or to move the screen horizontally.
Press or to move the screen vertically.
Press or to adjust.
Press or to adjust.
Press OK or to adjust all PC settings
automatically.
PC MONITOR DISPLAY MODES
WXGA 1280 x 720
WXGA 1360 x 768
SXGA
1280 x 1024
WXGA+ 1440 x 900
WSXGA+ 1680 x 1050
FHD 1920 x 1080
to enter.
or
to select the
or
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz
60 Hz