Publicité
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS LIGHT. THERE ARE NO
USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED
NEVER look directly at the laser emitter as serious eye injury can occur.
This symbol indicates that there is laser radiation emitted from this unit.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of
"dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
humans. Users should exhibit extra safety when this symbol appears in this instruction manual and follow all precautions as they are
stated.
1. Read these instructions thoroughly before using this item. Heed all warnings. Follow all instructions.
2. Disconnect from the power source before servicing.
3. REPLACE FUSE WITH SAME TYPE AND RATING.
4. This product is for indoor use only! To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store
or operate this product near any liquids.
5. Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
6. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding plug has two blades and a round grounding prong. The wide blade or third prong is provided for your safety. If the
provided plug does not fit your outlet, consult an electrician for the replacement of the obsolete outlet.
7. Protect all wires connected to this unit from being walked on or pinched, particularly plugs and the point where they exit from the
unit. When removing the cord from the power outlet, remove it by holding the plug not by pulling the cord.
8. Unplug the unit during lightning storms or when unused for long periods of time.
9. Allow the unit to cool down after 1 or 2 hours of continuous operation to prevent heat stress damage.
10. When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF.
11. Make sure the distance between the fixture and the lighted object is not less than 0.5 meters. Keep combustible and/or explosive
materials away from this unit. Do not block the ventilation slots.
12. In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs
carried out by unskilled people can lead to damage or malfunction. Please return the unit to the nearest authorized technical
assistance center.
13. The unit should never be connected to any kind of external AC dimmer. Operate only at intended voltage.
14. Make sure the power cord is never pinched or damaged.
15. Never disconnect the power cord by pulling or tugging on the cord.
16. Never carry the fixture directly from the cord. Always use the hanging/mounting bracket.
17. Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers, brackets
and associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce the
strength of the installation, placement or array. Any such condition severely reduces the safety of the installation and should be
immediately corrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term,
unexpected overloading. Never exceed the rating of the hardware or equipment.
18. ALWAYS use a safety chain or cable between the unit and overhead suspension truss to ensure safety to persons.
19. Consult a licensed, Professional Engineer regarding physical equipment installation. Ensure that all local, state and national
regulations regarding the safety and operation of equipment are understood and adhered to.
20. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
TECHNICIAN.
i
Publicité
