Phonocar VM 313 Notice De Montage Et D'emploi page 11

FUNCTIONS
GB
digit http://192.168.169.1 on the Internet address-bar. • Introduce credentials and password "hame". • Select Internet
> WAN Network. Select "3G-mode" at function WAN Connection Type >Select Auto APN > Apply. Note: You can digit
manually, if you know APN, Dial-number, username and user-password.
CONNECTION THROUGH ADSL-MODEM. Required devices: • Router. • ADSL-Modem with RJ11-linked telephone-
line. • RJ45-modem-cable.
INSTALLATION-PROCEDURE: • Use RJ45-cable, to connect LAN-exit of ADSL-modem to WAN/LAN-exit of Router.
• Switch-on ADSL-modem and Router. • Establish connection between your Computer and the Router's WIFI SSID
(Computer-Settings). • Open a Browser and log-in, by using Password "hame". • Introduce ADSL-login-credentials
(ID and Password) at Menu-popup, then press OK. • Start Internet-navigation. In case of navigation-problems, act as
follows: • Open Web-Browser and digit http://192.168.169.1 on the Internet address-bar. • Introduce credentials and
password "hame". • Select Internet > WAN Network. Select PPPOE (ADSL) at function WAN Connection Type. Make
sure you introduce the correct User-name and Password.
CONNECTION THROUGH CABLE / DHCP-MODEM.
Required devices: • Router. • Ready for Internet-access (example: LAN in the office, LAN in Hotels, etc. with Internet-
connection). • RJ45-cable of modem.
INSTALLATION-PROCEDURE: Use RJ45-cable, to connect the Router's LAN-exit to the Router's WAN/LAN-exit.
• Switch-on Router. • Establish connection between your Computer and the Router's WIFI SSID (Computer-Set-
tings). • Start Internet-navigation. In case of navigation-problems, act as follows: • Open Web-Browser and digit
http://192.168.169.1 on the Internet address-bar. • Introduce credentials and password "hame". • Select Internet > WAN
Network. Select DHCP at function WAN Connection Type.
11