Flex FX0111 Manuel De L'utilisateur page 10

SERVICE
WARNING
unauthorized personnel may result in
misplacing of internal wires and
components which could cause serious
hazard. We recommend that all tool service be
performed by a FLEX Factory Service Center or
Authorized FLEX Service Station.
GENERAL MAINTENANCE
WARNING
parts. Use of any other parts could create a
hazard or cause product damage.
Periodically inspect the entire product for
damaged, missing, or loose parts such as
screws, nuts, bolts, caps, etc. Tighten securely
all fasteners and caps and do not operate this
product until all missing or damaged parts are
replaced. Please contact customer service or an
authorized service center for assistance.
WARNING
away from metal objects. For example, to
protect terminals from shorting DO NOT place
WARNING
remove any component projecting from the
battery terminals. Fire or injury may result.
Prior to disposal, protect exposed terminals with
heavy insulating tape to prevent shorting.
Lithium-Ion Batteries: If equipped with a
lithium-ion battery, the battery must be collected,
recycled or disposed of in an environmentally
sound manner.
The EPA certified RBRC Battery
Recycling Seal on the lithium-ion
(Li-ion) battery indicates Chervon
North America is voluntarily
participating in an industry
MAINTENANCE
Preventive maintenance
performed by
When servicing, use only
identical replacement
BATTERY CARE
When batteries are not in
tool or charger, keep them
BATTERY DISPOSAL
Do not attempt to
disassemble the battery or
WARNING
battery pack from the charger/tool when
cleaning or performing any maintenance.
WARNING
compressed dry air. Always wear safety
goggles when cleaning tools with
compressed air. Do not attempt to clean by
inserting pointed objects through openings.
WARNING
plastic parts. Some of these are: gasoline,
carbon tetrachloride, chlorinated cleaning
solvents, ammonia and household detergents
that contain ammonia.
Store the tool indoors in a place that is
inaccessible to children. Keep away from
corrosive agents.
batteries in a tool box or pocket with nails,
screws, keys, etc. Fire or injury may result.
DO NOT PUT BATTERIES INTO FIRE OR
EXPOSE TO HIGH HEAT. They may explode.
program to collect and recycle these batteries at
the end of their useful life, when taken out of
service in the United States or Canada. The
RBRC program provides a convenient alterative
to placing used Li-ion batteries into the trash or
the municipal waste stream, which may be illegal
in your area.
Please call 1-800-8-BATTERY for information
on Li-ion battery recycling and disposal bans/
restrictions in your area, or return your batteries
to a FLEX Service Center for recycling. Chervon
North America's involvement in this program
is part of our commitment to preserving our
environment and conserving our natural
resources.
-10-
To avoid serious personal
injury, always remove the
CLEANING
The tool may be cleaned
most effectively with
Certain cleaning agents
and solvents damage
STORAGE