Publicité
Les langues disponibles
Les langues disponibles
2 IN 1SALAD MAKER & JUICER
12
CITRUS JUICER
1. Insert the electrical plug into a convenient outlet.
Switch – The off/on switch is spring-loaded to prevent unintentional "accidents", and
must be held down in the "on" position for continuous operation.
2. Attach the citrus juice catchment bowl to the motor base housing by inserting the
locking tabs in the indentations on the motor base housing and turning the bowl to the
right, with the open end of the bowl facing up.
3. Attach the juicing component to the motor gear extended through the juice catch-
ment bowl.
4. Press and hold the on button to start and sustain the turning function of the juicer
head.
5. Cut the unpeeled citrus fruit in half, and hold the flat exposed fruit firmly against the
rounded end of the exposed juicer head.
6. When use the citrus juicer, pressing the fruit against the juicer head and change
the orange with the juicing blade angle from time to time. To make sure squeeze more
juice. The orange weight can't exceed 500G one time. The strainer at the bottom of
the juicer head will retain the seeds and fruit pulp, and the juice will fall by gravity into
the containment bowl.
CLEANING
Never place the motor and its housing in water or other liquids. To clean, use a damp
cloth, and dry it thereafter with a dry cloth.
All other parts and inserts may be cleaned by immersion or spray, with a following rinse
and drying, before being put away to ensure maintaining the useful life of the applian-
ce. The accessory parts are dishwasher safe, but any
part that has an attached metal component should NEVER be placed in a microwave
for sterilization.
Publicité
