Pairing Your Leap+ And Phone - Acer Liquid Leap W1 Mode D'emploi

Pairing your Leap+ and phone

Once you have set up the app, you will need to pair it with your Leap+.
1. Turn on your phone's Bluetooth from Settings> Bluetooth.
2. Connect your Leap+ to its charger cradle.
3. Turn on Acer Leap Manager.
4. Tap Pair Device from the menu (accessible by tapping the Menu
icon in the upper left-hand corner) and tap Next.
5. You will be reminded to make sure your Leap+ is plugged into a
power source and is displaying a 4-character code. Tap Yes and
follow the onscreen instructions.
6. Acer Leap Manager will search for available devices.
7. Enter the four characters into Acer Leap Manager when requested
and tap Next. Confirm the code is correct and tap Yes.
Note
If necessary, your Leap+ firmware will be updated. This may take some time.
Be careful to keep your Leap+ close to your smartphone until the update is
complete.
Use with an iPhone - 13