Specifications - Fostex HP-A4BL Mode D'emploi

Specifications

Input
[USB] terminal
Interface
Supported sampling
frequency
Supported quantization bit
width
[DIGITAL IN] terminal
Connector type
Format
Supported sampling
frequency
Supported quantization bit
width
Output
[PHONES BALANCED] terminal
Connector type
Maximum output
Applicable load impedance
THD
Frequency response
[PHONES UNBALANCED] terminal
Connector type
Maximum output
Applicable load impedance
THD
Frequency response
[OUTPUT] (L, R) terminals (analog output terminal)
Connector type
Nominal output level
Applicable load impedance
THD
Frequency response
[DIGITAL OUT] terminal
Connector type
Format
Supported sampling
frequency
Supported quantization bit
width
General
[microSD] card slot
Format
Usable card
Supplied accessories
Power requirements
Power consumption
External dimensions
Weight
* Specifications and appearance are subject to change without notice for product improvement.
* Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
* Mac is a trademark of Apple Inc., registered in the U.S. and other countries.
* DSD is a trademark.
* All other trademarks are the property of their respective owners.
Fostex_HP-A4BL_3L.indb 11
USB 2.0 high speed
PCM: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
DSD: 2.8 MHz, 5.6 MHz, 11.2 MHz (* Up to 5.6 MHz on Mac)
16 bit, 24 bit
TOSLINK optical
S/PDIF
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
16 bit, 24 bit
XLR 4-pin
300 mW or more (32 ohms load)
16 ohms to 600 ohms
0.04% or less (at 1 kHz, 32 ohm load, 100 mW output)
20 Hz to 80 kHz, +/− 3 dB (32 ohm load, 100 mW output)
Φ6.3 mm stereo jack
150 mW or more (32 ohms load)
16 ohms to 600 ohms
0.04% or less (at 1 kHz, 32 ohm load, 100 mW output)
20 Hz to 80 kHz, +/− 3 dB (32 ohm load, 100 mW output)
RCA pin jack
2 Vrms (0 dBFS)
10 k ohms or more
0.01% or less (at 1 kHz)
20 Hz to 80 kHz, +/− 3 dB (at nominal level)
TOSLINK optical
S/PDIF
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
16 bit, 24 bit
FAT32
microSD card (SDHC), 32 GB maximum
USB cable (1 m) × 1, AC adapter × 1, rubber feet × 4, Owner's manual (this manual) × 1
DC 12 V (supplied from the AC adapter)
4.2 W
150 mm (W) × 34 mm (H, excluding rubber feet) × 157 mm (D, including protrusions)
Approx. 630 g
11
16/03/11 14:14