VENTILAIRSEC VMI PUREVENT VISION'R Série Notice D'utilisation page 18

Displays
Description of the screen display
Presentation of the pictograms
Air renewal selection
Pictograms Modes
Boost
Mode 3
Mode 2
Mode 1 (Eco)
Holiday
Smart mode
disabled
To select one of these modes, open the INFORMATION menu, select the desired mode and confirm
by pressing the button.
INFORMATION
To disable smart mode, press the validation button 5 times. To re-enable smart mode, press the
button 5 times again.
The tree symbolises the house's breathing. The tree
grows and sheds leaves at a speed proportional to the
air renewal rate in the house or the machine's
ventilation flow rate. It enables you to understand the
VMI®'s response. If the breathing speeds up, it means
that the air quality has deteriorated and the VMI® is
dealing with the problem.
Ventilation rate boost for 30 minutes.
Once the time is up: returns to the previous mode.
Ensures optimum air quality.
For renovation, acts like a remediation mode.
Ensures excellent air quality with the best comfort/energy consumption
compromise.
Energy saving mode - Ensures good air quality with a reduced nominal
ventilation rate. Enables compliance with current French legislation for
new housing.
Minimum ventilation flow rate and activation of the freeze protection
system.
Operation with a constant flow rate without regulation of the air flow
rate based on the humidity and/or CO2 sensors. The rate is that defined
in advance upon installation.
Turn the
dial
Details
CHOOSE THE
VENTILATION
MODE
Press the
button
18