What To Do If - Zanussi ZEG3915 Notice D'utilisation

Caution! You can remove the steel protection pan
under the heating element to clean the appliance
more accurate. When you do that make sure that you put

What to do if...

Problem
The appliance does not operate.
The cooking zone does not heat up.
Results of plate are not satisfactory.
If there is a fault, first try to find a solution to the problem
yourself. If you cannot find a solution to the problem
yourself, speak your dealer or the local Service Force
Centre.
If you operated the appliance incorrectly, or the in-
stallation was not carried out by a registered engi-
1
MOD.
PROD.NO.
SER.NO
DATA
MODEL
Stick it on Guarantee Card and send this part
1
Stick it on Guarantee Card and keep this part
2
Stick it on instruction booklet
3
www.zanussi.com
• Examine the fuse in the electrical system of the house in the fuse box. If
the fuses blow again and again, speak to a qualified electrician.
• Make sure that the appliance is connected to the electrical supply and the
• Examine the fuse in the electrical system of the house in the fuse box. If
the fuses blow again and again, speak to a qualified electrician.
•
• Make sure that the cooking pan is the correct size for the plate.
•
• Make sure that the setting is correct for type of cooking.
2
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
MODEL
in its correct position after you clean the appliance. This is
most important for correct operation of the appliance.
Possible cause and remedy
supply is on.
Make sure that plate is clean and dry.
Make sure that cooking pan has a flat bottom.
neer, the visit from the customer service technician or
dealer may not take place free of charge, even during the
warranty period.
Labels supplied with the accessories bag
Stick the adhesive labels as indicated below:
3
MOD.
PROD.NO.
0049 SER.NO.
TYPE
230V-50Hz
IP20
17