Télécharger Imprimer la page

ALLIANCE ATZ95A N1102 Série Mode D'emploi page 3

Publicité

Les langues disponibles

Les langues disponibles

2. Measure and add low sudsing detergent, fabric
softener, and bleach to the dispenser drawer.
Refer to section on Using Your Dispenser
Drawer.
IMPORTANT: If using detergents made for
topload washers, avoid oversudsing by using only
1/4 cup regular detergent (1/2 of the recommended
amount).
3. Load clothes into wash drum. Refer to section on
Load Sizes in your Use and Care Guide.
4. Close the loading door tightly. The washer will
not operate with the loading door open.
WARNING
To reduce the risk of serious injury, do not
bypass the loading door switch by
permitting the washer to tumble or spin with
the loading door open.
802268
FLW2059N
FLW2060N
FLW2061N
W095
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
5. Set WASH/RINSE temperatures.
TEMPERATURE
WARM
WARM
HOT
COLD
There are five WASH/RINSE temperatures available –
Boosted Hot Wash/Cold Rinse, Hot Wash/Cold Rinse,
Warm Wash/Cold Rinse, Warm Wash/Warm Rinse and
Cold Wash/Cold Rinse.
Refer to the Available Water Temperatures section
for the temperature that works best for your garments.
WARNING
Window may be hot in the Boosted Hot and
Hot wash cycles.
6. Select EXTRA RINSE if desired.
The extra rinse control is useful for detergent
sensitive skin. By pressing the EXTRA RINSE to
ON, the REGULAR, PERM PRESS, and HAND
WASH/DELICATE cycles will each provide an
additional rinse. If the extra rinse is desired, press
the switch to ON. When the extra rinse is not
wanted, OFF should be selected.
WARM
COLD
COLD
COLD
FLW1931N
FLW2076N
W325
FLW2073N
3

Publicité

loading