PICO TA369 Manuel D'utilisation page 8

TA369 8-channel MSO Pod
Using in PicoScope 6
1. When you start PicoScope 6 with a TA369
MSO pod for the first time, only the analog
channels will be visible.
2. The MSO button in
the toolbar shows that
your oscilloscope has
mixed-signal capability.
3. Click the MSO button
to open the MSO setup
dialog.
Further information
For advice on operating the TA369 MSO pod in PicoScope 6, see the
Consult www.picotech.com for information on using the PicoScope SDK, which allows you to control
the MSO pod and oscilloscope from your own software application.
For technical specifications, see the
Made in the United Kingdom.
8
PicoScope 6000E Series Data Sheet
Copyright © 2020 Pico Technology Ltd. All rights reserved.
4. Drag the digital
channels that you wish
to view from the upper
boxes into the lower,
empty box.
5. Click Enable All, then OK. The PicoScope
display will then change to show the selected
digital inputs.
PicoScope 6 User's
at www.picotech.com.
User's Guide
Guide.
DO327-1