TRENDnet TV-IP212 Guide D'installation Rapide page 14

14. Disconnect the RJ-45 cable and
unplug the power to the camera
server. Then plug the power back
in (TV-IP212W/TV-IP312W).
Note: The TV-IP212W/TV-IP312W will not work wirelessly until you disconnect
the Ethernet cable from the back of the camera.
15. Verify the Power and Link LEDs
are on.
16. Click Live View.
Your configuration is now complete.
For detailed information regarding the
TV-IP312W configuration and advanced settings, please refer to the User's
Guide included on the Utility & Driver CD-ROM or TRENDnet's website at
www.trendnet.com
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
TV-IP212/TV-IP212W/TV-IP312/
Register Your Product
www.trendnet.com/register
Thank you for choosing TRENDnet
12
English