Parrot Sequoia Guide Utilisateur page 13

PROCESSING DATA
The data retrieved by Sequoia can be processed in several ways.
With the MicaSense ATLAS data management software
You can analyse the photos taken by Sequoia with the MicaSense ATLAS
software. For more information, go to www.micasense.com
With the PIX4Dmapper mapping software
You can analyse the photos taken by Sequoia with the PIX4DMapper
software. For more information, go to www. pix4d.com.
Agronomic recommendations from AIRINOV
Airinov offers a nitrogen fertiliser recommendation service for rapeseed and
wheat. For more information, go to www.airinov.fr.
22
INTEGRATING SEQUOIA VIA PTP OR PTP/IP
PTP and PTP/IP protocol can be used to control and set up Sequoia.
PTP and PTP/IP software such as gphoto2 and ptpcam must be used and
this means that programmes integrating Sequoia can be developed or
communication with another media can be established.
Sequoia supports the following PTP commands:
Standard
GET_STORAGE_IDS
GET_STORAGE_INFO
GET_NUM_OBJECTS
GET_OBJECT_HANDLES
GET_OBJECT_INFO
GET_OBJECT
GET_THUMB
DELETE_OBJECT
Request GET_PARTIAL_OBJECT
INITIATE_CAPTURE
FORMAT_STORE
GET_DEVICE_PROP_DESC
GET_DEVICE_PROP_VALUE
SET_DEVICE_PROP_VALUE
RESET_DEVICE_PROP_VALUE
TERMINATE_OPEN_CAPTURE
INITIATE_OPEN_CAPTURE
EVENT_CANCEL_TRANSACTION
EVENT_OBJECT_ADDED
EVENT_OBJECT_REMOVED
EVENT_STORE_ADDED
Event EVENT_STORE_REMOVED
EVENT_DEVICE_PROP_CHANGED
EVENT_DEVICE_INFO_CHANGED
EVENT_STORE_FULL
EVENT_CAPTURE_COMPLETE
23