CDVI NANOPW Mode D'emploi page 4

INSTALLATION MANUAL
NANOPW - NANOPB
Wiegand 125 Khz proximity reader
5] WIRING DIAGRAM
Card Swiped
- Badge recognized: the orange LED illuminates and the buzzer activates for 150 milliseconds.
Wiegand output formats
DIP1 DIP2
OFF OFF
ON OFF
OFF ON
Buzzer activated or not after badge recognised :
By default the buzzer is activated in standard mode.
To inhibite the buzzer :
- Power Off the NANO
- Connect the brown wire with the black wire
- Power On the NANO
- As soon as the buzzer beep, disconnect the brown wire
Now the buzzer is not activated after badge recognised.
The brown wire can be connected to the output of the access unit and be activated or not.
To enable the buzzer :
- Power Off the NANO
- Connect the brown wire with the black wire
- Power On the NANO
- As soon as the buzzer beep, disconnect the brown wire
Now the buzzer is activated after badge recognised.
The brown wire can be connected to the output of the access unit and be activated or not.
4
cdvigroup.com
Cable
Red Input voltage 12V dc
Black 0V
1 2
ON
Blue Clock
Green Data 0
OFF
White Data 1
Brown Buzzer
Yellow Green LED
Orange Red LED
BITS
26
30
44
When powered
- Green LED illuminates for 1 second
- Red LED illuminates for 1 second
- Buzzer sounds for 1 second
Operating mode
- Buzzer activated with 0V input
- LEDs activated with 0V input
Green LED Red LED
OFF OFF
OFF ON
ON OFF
ON ON
EN
Status
OFF
red
green
blue