Watts Vision central Guide D'utilisation page 3

GENERAL PICTOGRAMS
To return to the main screen.
To return to the previous screen.
The buttons with a red point need a long press (min
5s).
MAIN SCREEN
1- Date.
2- Display the hour or the ambient T° of the room or zone. Make
your choice by pressing on the central part of the screen
3- Outside sensor temperature.
4- Screen lock. A long press toggles between locking and
unlocking.
5- Error flag for the system (RF, limits, alarms, battery
anomalies...). Access to the list by pressing on this icon.
6- The device is working on battery (! only for settings and
pairing).
7- Rooms access (active even if the Central is locked to see but
not to change settings).
8- Main menu.
9- Holidays mode status.
10- Boiler status displayed if connected to the Central.
HOUR SETTING

Set the hour and the date. Then press on
HOUSE CREATION
 long press on 
Create all the rooms
1. Room changing.
2. Current room name.
3. To delete a room (zone).
4. To create or add a room (zone).
5. To change current room (zone) name.
Press
1-
2-
displayed).
3-
Use this menu to put all the same devices type in the same
operating mode.
or
a- To select the heating devices mode for all the installation.
b- To select the ON/OFF devices mode for all theinstallation.
c- To select the lighting devices mode for all the installation.
d- To validate the selections.
4-
(Not available yet)
5-
In this menu, you can set:
3
MAIN MENU
to go to main menu
Consumption statistics menu.
Language (the flag of the current language is
General commands menu.
Heating/cooling mode management menu.
User settings menu.
- Hour, Date.
- Summer-Winter (Manual, Automatic).
- Temperature unit (°C, °F).
- Background Color.
- Buttons color
- Backlight
- Screen saver (Enabled, Disabled).
- Screen cleaner.
- Factory default user.