Danby Products Premiere DDRSOAlGP Guide D'utilisation Et Soins De Propriètaire page 9

OPERATING INSTRUCTIONS (cont'd)
INSTALLING
PVC When using the continuous drain function, the PVC hose must be placed horizontally
HOSE
DRAIN
CONTINUOUS
be configured for continuous dririn. You can use the supplied drain
DRAIN The function of continuous drain can be performed using the following steps:
1) To save having to periodically empty the water tank, this unit can
hose to connect to the continuous drain connector.
2) Unscrew and remove the drain cover at the rear of the unit (Fig
A).
3) Remove the soft rubber stopper, and place it in the water tank for
safe keeping (Fig. B).
4) Insert the drain hose through the hole of the drain cover (Fig. C).
5) Ensure the rubber seal ring is properly seated in the end of the
hose as shown in Fig. C.
6) Connect the drain hose to the drain port (Fig. D).
7) Tig]:lten the drain cover in clockwise direction onto the rear of
the unit (Fig. D).
8) Place the bucket in its original location (Fig. E).
below the drainage hole. Avoid uneven ground and folding the hose. NOTE:Should
you damage or rmsplace the pvc drain hose, a standard garden hose can be used.
nruit D t
.
.
[)
_,..Drain
covcr ll.
Drain
Drain hose --
· · ""
a ·-.....
Drain
IFtg.AI
. @ cover
IFig.BI
Soft rubber
D
stopper
cover
...
IFig.cj
IFig .Dl
Drain cover
Drain hose
I El
Fig.