tbs electronics Expert Modular Mode D'emploi page 18

F1.3 Nominal temperature. The temperature at which the battery manufacturer rates your
battery's capacity.
Default: 20°C
F1.4 Peukert's exponent. Peukert's exponent represents the effect of reducing battery capacity
at higher discharge rates. When the Peukert value of your battery is unknown, it is
recommended to keep this value at 1.17. A value of 1.00 disables the Peukert
compensation and could be used for Lithium based batteries.
Default: 1.17
F1.6 Battery temperature. In this Function the average battery temperature can be adjusted
when no temperature sensor is connected. When a temperature sensor is connected, the
temperature readout in the Normal Operating Mode is enabled.
Default: 20°C
F1.7 Battery bank 1 name. Choose a display name for your battery bank that comes nearest to
your application.
Default: MAIN
Table 8
Battery bank name
Bank 1
Bank 2
Bank 3
Main
Aux.
Aux.1
Aux.2
Primary
Secndry
Start
Service
Accesry
House
Port
Starbrd
Power
Gen.Strt
Bowtrst
Radio
Vehicle
Trailer
Drive
Brake
Solar
Range: 0 – 40°C
Range: 1.00 – 1.50
Range: -20°C – 50°C
Range: see table 8
Description
Battery bank 1
Battery bank 2
Battery bank 3
Main battery bank
Auxiliary battery bank
Auxiliary battery bank 1
Auxiliary battery bank 2
Primary battery bank
Secondary battery bank
Starter battery
Service battery bank
Accessory battery bank
House battery bank
Port battery
Starboard battery bank
Power battery bank
Generator starter battery
Bow thruster battery
Radio battery
Vehicle battery
Trailer battery
Drivetrain battery
Brake battery
Solar battery
18
Step size: 1°C
Step size: 0.01
Step size: 1°C