Assembly - Gastro-Star MNS00014.02 Instructions De Montage

5. Assembly

The cold rooms can be assembled on different ways, this way, the client can do it according to his choice. With the instructions
manual you have "commercial technical information" including the standard assembly/s of the cold room panels. However, you
must follow these aspects:
Before the panels' assembly, you must place an alignment part in the locks. The function of these parts allows a perfect
alignment of locks. You must place only one part on each pair of locks (Fig. 1)
At first you must assemble the bottom panels (Fig. 2);
All the camlocks are fastenend by the interior of the cold room as it is mentioned below, except those on top of the cold
room panel that you must fasten by the exterior of the cold room on the opposite direction.
Turn the screwdriver on the opposite direction of the hands of a clock till it stops. (Fig. 3 – A direction);
•
Turn the screwdriver on the opposite direction till it fasten (Fig. 3 – Sentido B)
•
MNS00014.02
TEC
Assembly Instructions
Fig. 1
Fig. 2
A
B
Fig. 3
N.º
MNS00014.02
12/39