Disposal; Technical Specifications - Beurer Barbers Corner HR 4000 Mode D'emploi

3. Allow the stainless steel blade or the slim contour blade to dry completely before you reattach them
to the device. Ensure that no water gets inside the device! Risk of electric shock!
Applying oil to the stainless steel blade or the slim contour blade
In order to achieve consistently optimum cutting results, you occasionally need to oil the
stainless steel blade. Apply a drop of cutting oil to the stainless steel blade or the slim contour
blade, at the latest as soon as the oil indicator symbol lights up in the display.

10. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its use-
ful life. Dispose of the device at a suitable local collection or recycling point in your country.
Dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Elec-
tronic Equipment). If you have any questions, please contact the local authorities responsi-
ble for waste disposal.
WARNING
The integrated battery cannot be removed for disposal. Risk of explosion and injury. The lithium-ion
battery used in this device must not be disposed of in household waste, but must be disposed of cor-
rectly. For information on disposal, please contact the authorised seller or a municipal collection point.
During disposal, it must be pointed out that the device contains a battery.
Discharge the battery before disposal. Take the device and switch the beard styler on until the bat-
tery is flat.
Note
If it is not possible to discharge the battery due to a fault or damage, please consult your waste col-
lection point.

11. Technical specifications

Model
Weight
Device dimensions
Device protection class
Device input
Adapter protection type
Adapter protection class
Voltage supply
(TPA-97050100BU)
Average active efficiency
No-load power consumption
Battery:
Capacity
Nominal voltage
Type designation
Subject to technical changes
HR 4000
129 g
16.8 x 4.3 x 4.4 cm
IPX4
5 V 1 A
IP20
II
Input: 100-240 V~; 50/60 Hz; 0.15 A
Output: 5.0 V 1.0 A; 5.0 W
≥ 73.98 %
≤ 0,07 %
600 mAh
3.2 V
Lithium-ion
25