Publicité
Les langues disponibles
Les langues disponibles
• In schools, training centres, hobby and self-help workshops, the use of the product must be supervised by trained
personnel in a responsible manner.
• If you have reason to assume that safe operation is no longer possible, disconnect the device immediately and secure it against
inadvertent operation.
It can be assumed that safe operation is no longer possible if:
- the device shows visible signs of damage,
- the device no longer functions
- after a longer period of storage under unfavourable conditions or
- following heavy stress during transportation.
Parts list
(see page 23)
(1) Bottom and rear side (1 piece)
(2) Top side (1 piece)
(3) side parts (2 pieces)
(4) Hood (1 piece)
(5) Filter 1 (2 piece)
(6) Ventilator (1 piece)
(7) Rotary table (1 piece)
(8) Ventilator cover (1 piece)
(9) Connection piece (1 piece)
(10) Extraction pipe (1 piece)
(11) Edge protector (4 pieces)
(12) Hose clamp (1 piece)
(13) Carrier handle (1 piece)
(14) Feet for ventilator (2 pieces)
(15) Screws long (4 pieces)
(16) Screws short (2 pieces)
(17) Filter 2 (2 piece)
Assembly
(see page 24)
First you have to assemble the airbrush extraction system. Only use a suitable Phillips screwdriver for this purpose!
Proceed step by step in line with the following illustrations:
Step 1 (see page 24)
First fold the housing parts along the perforation!
Step 2 (see page 24)
Now assemble the housing parts (1) - (3) as follows.
10
Publicité
