Operation; How To Avoid And Solve Possible Problems; Technical Information - Ebode IR Link C Guide Utilisateur

6. Operation

To use the ebode IR Link C Remote Control Extension System, simply point your handheld
remote control(s) at the IR Receiver and press the desired button. A red LED on the front of
the IR Receiver will indicate the reception of your InfraRed command.
NOTE: The maximum usable distance between your IR remote and the IRLP Receiver will
vary for each remote and might be shorter than when directly used in the room controlling
the satellite Receiver or other IR controlled devices.
ADVANCED MULTIROOM HOOKUP
Figure 3 shows an advanced system using
two ebode IR Link C's in a multi-room
installation. Except for the addition of a 2-
way DC passing RF splitter, the
connections are essentially the same.
7. How to avoid and solve possible
problems
Although the ebode IR Link C is equipped
with proprietary eIR x (pronounced Irex)
2 TM
Technology, which guarantees a high
level of immunity of InfraRed noise of
direct sunlight, CFL lighting and Flat Panel
TV's (including Plasma, LCD and LED), in
rare cases, the IR Receiver may have to
be moved to a different location if the
unit is picking up unexpected
interference. This interference may, in
severe cases, prevent the system from
working. You can identify interference
when the InfraRed Emitters are lit or
blinking, even when you're not using a remote control transmitting at the time.
After repositioning, check to see if the ebode IR Link C operates the satellite Receiver or
other components. If the ebode IR Link C still does not work, reposition the IRED Emitter(s). It
may not be located directly over the component's InfraRed receiving "window". Consult
the owner's manual of the unit or the manufacturer for the exact location of the InfraRed
"window".
IMPORTANT: For installations involving more than two remote rooms, use the services of a
competent professional audio/video installer experienced in InfraRed Remote Control
Systems.
Do you still have questions? Please refer to www.ebodeelectronics.eu

8. Technical information

Power Supply: 230V~50Hz, 12VDC 100mA; 2.1mm
IR emitting diode cable: 3 IR LEDs
Cable length: 3 m from CPL to IR LEDs,
Receiver: dimensions 55x40x25mm
10-8-2010 6 ebode IR LINK C