Strolling Cts Kit (Wheels Only); Installation; Storage - Chariot X-COUNTRY Série Mode D'emploi

STROLLING CTS KIT (
STROLLING CTS KIT (

2.0 Installation

Remove the 5-star knob from the wheel
assembly and insert the threaded tube
upwards through the large hole in the wheel
arm attachment bracket.
WARNING:
Overloading the carrier with more than 2.2 lb (1 kg) in the rear storage pouches can make the carrier unstable.
Failure to properly attach wheels could cause the wheels to fall off, resulting in an accident and serious injury.
Direct impacts against the pivoting stroller wheels could cause damage to the wheel arm attachment brackets.
The following safety precautions should be followed, otherwise injury or death to you or to your passengers could result:
– Use wrist safety strap at all times.
– Always use seat belts.
– Always use parking brake when stroller is stationary.
– Never in-line skate with the stroller kit.
– Never climb or descend stairs with the stroller.
– Use extreme caution on hills.
wheels only )
wheels only )
Thread the 5 star knob onto the threaded
tube and tighten securely. Repeat with the
other wheel.
CAUTION: Regularly check the knobs to
ensure they are tightened securely.
1 1
1 1

2.1. Storage

To store the wheels on the carrier when
using another conversion kit, turn the wheel
assembly upside down angled towards the
back of the carrier. Insert the threaded tube
downwards into the wheel arm attachment
bracket. Thread the 5-star knob onto the
threaded tube and tighten securely.