Trebs Comfortlight 99751 Mode D'emploi page 17

1. Insert the plug into the socket. Use the "On" and "Off" buttons to turn the device on and off.
2. Use the two buttons to set the brightness of the lights.
3. Choose one of the colors on the remote control to freeze the lights onto one color.
4. You can also set the light to one of the optional color programs:
FLASH: colors change within 2 seconds
STROBE: flashing white light
FADE: colors fade slowly
SMOOTH: colors change within one second.
7. Maintenance instruction
1. Be sure the power off when maintenance and repair.
2. Periodically clean the floodlight glass, in order to maintain good light transmittance.
3. Regularly clean the dust of floodlight's shell and radiator, in order to maintain good thermal
performance.
4. Not to use water or corrosive to clean the light, preferably with dry rag.
5. Directly use screwdriver to open rear cover when need replace driver, remove the driver, three power
cords connect to the corresponding driver port "L", blue to "N", yellow to "", Red DC power cord or
white cord to driver's cathode, attention don't reversely connection.
8. Service
If you have any further questions about the product after reading this manual, please contact the Trebs
customer service: info@trebs.nl.
CE