Publicité
Les langues disponibles
Les langues disponibles
Connection of the device
- Check that the tension and the frequency of the electricity network suit to the values
indicated on the descriptive plate.
- Check that neither the cord nor the plug are damaged.
- Make sure that every control knob is positioned on 0.
- Unwind completely the electric power cable and connect it in a plug connected with
the earth.
- The device is connected.
NB: in case of connection of the device in a plug without earth protection or directly on
the electricity network, confide its connection to a qualified person .
c) Use of device :
Elements of command and display
Command/Display
Commutator
7 positions
(n°1 on picture)
Position 0
Position 6
Orange pilot light
(n°2 on picture)
Putting on
Turn on the commutator (n°1 on picture) on wished position. The orange pilot light
(n°2 on picture) is on. The machine is warming up and is working.
Temperature setting
Set the power by positioning the commutator (n°1 on picture) to the desired posi-
tion.
Stopping the appliance
Set commutator (n°1 on picture) on 0: the appliance is no longer functioning.
Disconnect the power cable.
Let the device cool.
Clean the appliance. (see 6. Cleaning)
d) Breakdown / repair:
In case of breakdown or of damaged part, please call your after-sales service
and confide any technical operation to qualified person.
Function
Stop
Maximum
Warming up (pilot light on)
Desired temperature reached (pilot light off)
15
Publicité
