Insignia NS-R5111 Mode D'emploi page 7

NS-R5111 Arm Band Radio
To recall preset stations within the
selected band:
1
2
When the batteries are low, the LCD will start flashing
and eventually shut off.
Using Hold
To use the Hold feature:
1
2
Setting the time
To set the time during power off mode:
1
2
3
Press the PRESET button.
Press the TUN UP or TUN DN button to change to a
different stored station.
• Press the ON/OFF button to turn off the radio,
then replace the batteries.
Note
Time must be reset after you change the
batteries.
Set the HOLD switch to ON and all buttons will be
disabled. The Hold indicator appears on the LCD.
Set the HOLD switch to OFF to enable all buttons.
Press and hold the STEREO/TIME SET button.
Press the TUN UP button (hour) to set the hour, then
press the TUN DN button (minute) to set the minute.
Press and hold the STEREO/TIME SET button to
exit Time Set mode.
Note
You cannot set the time during power on
mode.
www.insignia-products.com
5