Troubleshooting; Warranty; Disposal - Dometic PERFECTVIEW VS 400 Instructions De Montage Et De Service

Troubleshooting

Setting the distance markers (fig. b, page 7)
8.3
You can shift each distance marker (1), and the side markers (2), into one of three positions.
To set the distance markers, proceed as follows:
➤ Press the MENU button to open the menu.
➤ Use the
button to select the menu item DISTANCE ADJ.
➤ Press the OK button.
➤ Press the
or
✓ The markers which can be set are highlighted in red.
➤ Press the
or
➤ Press the MENU button to quit the settings.
9 Troubleshooting
Fault
The monitors remains black. Ensure that the monitor is switched on.
10

Warranty

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the addresses) or
your retailer.
For repair and guarantee processing, please include the following documents when you send in
the device:
• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
11

Disposal

➤ Place the packaging material in the appropriate recycling waste bins wherever possible.
M
If you wish to finally dispose of the product, ask your local recycling centre or specialist
dealer for details about how to do this in accordance with the applicable disposal regu-
lations.
18
button to select the markers you wish to set:
button to set the marker highlighted in red.
Suggested remedy
Ensure that the controller and the monitor share a power connec-
tion.
VS400
EN