Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.
Remove trim ring from outer
window assembly
Using a Phillips screwdriver, remove the 6 screws from the
outer window retainer and rotate the outer window assembly
clockwise until the square notches line up with the 4 tabs
on the trim ring indicated with arrows in the figure A above.
Then lift the outer window retainer up and off the trim ring
and set aside (B).
5.
Reverse outer window/handle
Rotate the outer window 180°.
6.
Rotate and reassemble outer door
and trim ring
A
B
Align the notches on the outer door assembly with the tabs on
the trim ring and lower into place as shown in figure A.
Rotate the outer door assembly counterclockwise to lock tabs
into place (figure B). Using a Phillips screwdriver, secure with
6 screws removed earlier.
IMPORTANT: Do not overtighten.
A
B
17
Publicité
Table des Matières
