SystemAir IRC Manuel D'installation page 7

C: Degrees C
F: Degrees F
NTC - IR2 NTC - IR2
IRC
Configuration menu Configuration menu
2- System
Co
St
Refer to the figure at page 3 (Aspect and display).
Refer to the figure at page 3 (Aspect and display).
3- Set - point displaying
With the remote control OFF press button B for at least 5 seconds With the remote control OFF press button B for at least 5 seconds
Ye
to access to the configuration menu. "1-" is displayed: this is the to access to the configuration menu. "1-" is displayed: this is the
No
first settable item of the menu. To check this item's value press first settable item of the menu. To check this item's value press
button B again. The default value is displayed first. button B again. The default value is displayed first.
4- Set-point value
15,16,17,18,19,20,21,
22,23,24,25,26,27,28,
Item Item Value Value
29,30,31,32 ˚C
1- 1- Temperature units Temperature units
59,60,61,62,63,64,65,
C: Degrees C C: Degrees C
66,67,68,69,70,71,72,
73,74,75,76,77,78,79,
F: Degrees F F: Degrees F
80,81,82,83,84,85,86,
87,88,89,90 ˚F
2- 2-
System System
5- Reset step value
Co Co
0;0,5;1;1,5;2 ˚C
St St
0;1;2;3;4 ˚F
3- 3- Set - point displaying
Set - point displaying
Ye Ye
No No
6- Fan speed type
F
4- 4- Set-point value
Set-point value
U
15,16,17,18,19,20,21, 15,16,17,18,19,20,21,
22,23,24,25,26,27,28, 22,23,24,25,26,27,28,
29,30,31,32 ˚C 29,30,31,32 ˚C
7- Blind groups available
0
59,60,61,62,63,64,65,
59,60,61,62,63,64,65,
66,67,68,69,70,71,72, 66,67,68,69,70,71,72,
1
73,74,75,76,77,78,79, 73,74,75,76,77,78,79,
80,81,82,83,84,85,86, 80,81,82,83,84,85,86,
...
87,88,89,90 ˚F
87,88,89,90 ˚F
4
5
5- 5- Reset step value Reset step value
0;0,5;1;1,5;2 ˚C
0;0,5;1;1,5;2 ˚C
0;1;2;3;4 ˚F 0;1;2;3;4 ˚F
8- Blind Inclination
No
Ye
6- 6- Fan speed type Fan speed type
F
F
U
U
7- 7- Blind groups available Blind groups available
0
0
1 1
... ...
4
4
5 5
8- Blind Inclination
8- Blind Inclination
No No
Ye Ye
˚C -indicates that all temperatures will be displayed in
degrees C.
˚F -indicates that all temperatures will be displayed in
degrees F.
[Defaults: "C": Degrees ˚C]
Temp SP is shown thru bar graph
Temp SP is shown thru the 7 segments digits and .5 icon
To change this value, press button F or D. Press B to save the new
[Defaults: "Co": Communicating] To change this value, press button F or D. Press B to save the new
setting. To display and/or change another item ("2-") press button B setting. To display and/or change another item ("2-") press button B
and repeat the steps above. and repeat the steps above.
If no button is pressed within 60 seconds, the system quits the If no button is pressed within 60 seconds, the system quits the
The set-point value will be displayed on the IR2 lcd
menu automatically. No message is sent.
menu automatically. No message is sent.
The set-point value will be NOT displayed on the IR2 lcd
The configuration menu is described in the following table:
The configuration menu is described in the following table:
[Defaults: "Ye"]
Description Description
˚C -indicates that all temperatures will be displayed in ˚C -indicates that all temperatures will be displayed in
degrees C. degrees C.
˚F -indicates that all temperatures will be displayed in ˚F -indicates that all temperatures will be displayed in
degrees F. degrees F.
[Defaults: "C": Degrees ˚C] [Defaults: "C": Degrees ˚C]
[Defaults: 22 ˚C; 72 ˚F]
Temp SP is shown thru bar graph
Temp SP is shown thru bar graph
Temp SP is shown thru the 7 segments digits and .5 icon Temp SP is shown thru the 7 segments digits and .5 icon
[Defaults: "Co": Communicating] [Defaults: "Co": Communicating]
The set-point value will be displayed on the IR2 lcd The set-point value will be displayed on the IR2 lcd
The set-point value will be NOT displayed on the IR2 lcd The set-point value will be NOT displayed on the IR2 lcd
[Default: "0,5" ˚C; "1" ˚F]
[Defaults: "Ye"] [Defaults: "Ye"]
Fixed speed
Variable fan speed
[Default: "F" 3 fixed speeds]
There is no blind/groups to control: no icons will be
displayed
Just one blind group is available: "1" group icons will not
be illuminated
...
Four lights groups are available: "Lamp" and "4"
[Defaults: 22 ˚C; 72 ˚F] [Defaults: 22 ˚C; 72 ˚F]
groups icons will be illuminated in the light menu
There is no group, but user can manage the blind
[Defaults: "0": Blinds control disabled.]
The installed blinds doesn't have the capability to
modify its inclination
The installed blinds has the motor able to change
its inclination.
[Default: "0,5" ˚C; "1" ˚F] [Default: "0,5" ˚C; "1" ˚F]
[Default: "No" Blinds doesn't have the capability to
change its inclination]
Fixed speed
Fixed speed
Variable fan speed Variable fan speed
[Default: "F" 3 fixed speeds] [Default: "F" 3 fixed speeds]
There is no blind/groups to control: no icons will be
There is no blind/groups to control: no icons will be
displayed
displayed
Just one blind group is available: "1" group icons will not Just one blind group is available: "1" group icons will not
be illuminated be illuminated
... ...
Four lights groups are available: "Lamp" and "4"
Four lights groups are available: "Lamp" and "4"
groups icons will be illuminated in the light menu groups icons will be illuminated in the light menu
There is no group, but user can manage the blind There is no group, but user can manage the blind
[Defaults: "0": Blinds control disabled.] [Defaults: "0": Blinds control disabled.]
The installed blinds doesn't have the capability to The installed blinds doesn't have the capability to
modify its inclination modify its inclination
The installed blinds has the motor able to change The installed blinds has the motor able to change
its inclination.
its inclination.
[Default: "No" Blinds doesn't have the capability to [Default: "No" Blinds doesn't have the capability to
change its inclination] change its inclination]
NO
E N G L I S H
E N G L I S H
YES
If "System" is Co, the
set - point will be not
displayed automatically.
NO
Displayed Displayed
NO NO
NO
NO
YES
If the reset step value is
set to 0, the stand
alone mode is not
available. The IR remote
YES YES
control and its display,
IRC If "System" is Co, the If "System" is Co, the
work as in
set - point will be not set - point will be not
IRC
communicating mode
displayed automatically.
displayed automatically.
NO: In case of variable fan,
the icons available are
NO
NO
two: HIGH speed and
AUTO mode
YES: Once the blind menu
is selected, the groups icon
will be energized on the
lcd (no icons if just one
group is selected)
"A" and "1" icons are
energized in the blind
menu. User can manage
YES YES
all blinds or just one
If the reset step value is
If the reset step value is
set to 0, the stand set to 0, the stand
NO
alone mode is not alone mode is not
The blind inclination
available. The IR remote available. The IR remote
feature becomes active
control and its display, control and its display,
into the Blind Menu. No
work as in
work as in
icon point out this feature
communicating mode communicating mode
out of the blind menu
NO: In case of variable fan, NO: In case of variable fan,
the icons available are
the icons available are
two: HIGH speed and two: HIGH speed and
AUTO mode AUTO mode
YES: Once the blind menu YES: Once the blind menu
is selected, the groups icon
is selected, the groups icon
will be energized on the
will be energized on the
lcd (no icons if just one lcd (no icons if just one
group is selected) group is selected)
"A" and "1" icons are
"A" and "1" icons are
energized in the blind energized in the blind
menu. User can manage menu. User can manage
all blinds or just one all blinds or just one
NO NO
The blind inclination The blind inclination
feature becomes active feature becomes active
into the Blind Menu. No into the Blind Menu. No
icon point out this feature
icon point out this feature
out of the blind menu out of the blind menu
GB
GB - 5
GB - 5 GB - 5