Appliance Description; Startup - Beem Startherm Mode D'emploi

BEEM - Elements of Lifestyle
WARNING
This indicates a possible hazardous situ-
ation, which could lead to severe physical
injury or death.
► Follow these instructions to avoid
danger.
CAUTION
This indicates a potentially hazardous
situation, which could lead to minor injuries
or material damage.
► Follow these instructions to avoid
danger.
NOTE
A note contains additional information to
simplify the use of the appliance.
Symbols on the appliance
Symbol Meaning
Warning of hot surfaces

Appliance description

Overview / Delivery contents
(see illustration on the left fold-out page)
1 Housing
2 Rotary knob, temperature setting
3 POWER control indicator, red
4 Rotary knob, time setting
5 Door handle
6 Baking tray
7 Oven door
8 Grill grate
9 Crumb tray
10 Spacer, rear side
11 User manual
(not illustrated)
°C
(not illustrated)

Startup

Unpacking
1. Remove the appliance, all accessory
parts and the user manual from the box.
2. Remove all packaging materials and pro-
tective foils from the product and the acces-
sories before using it for the first time.
3. Check for visible signs of damage or mis-
sing items.
NOTE
► Never remove the rating plate or any
warning signs on the appliance.
► Keep the original packaging during the
guarantee period in order to pack the appli-
ance properly in the event of a guarantee
or warranty claim. Transport damage will
invalidate the warranty or guarantee.
Before using for the first time
Before using the appliance for the first
time, heat it up once for approx. 15 minutes
with the window open to remove any
production residue (grease).
1. Set the highest temperature.
2. Set the cooking time to 15 minutes.
3. After the time has elapsed, open the oven
door and allow the hot air to dissipate.
4. Pull the plug out of the mains socket.
5. Allow the appliance to cool down comple-
tely.
6. Clean the appliance as described in
the section Cleaning and maintenance.
NOTE
When using for the first time, it is possible
that production-related additives such as
grease could cause slight odour or smoke.
This is completely normal! Ensure sufficient
ventilation.
EN 11