Power Supply Unit Section - dBTechnologies LVX XM15 Mode D'emploi

English

POWER SUPPLY UNIT SECTION

7. MAINS FUSE
Mains protection fuse.
8. AUTO-RANGE MAINS INPUT
POWERCON connector input.
9. "MAINS LINK" POWER OUTPUT
This connector is intended to supply power to a second module.
WARNING!
• The fuse installed at the factory is rated for operation in the 220-240 V
voltage range. If you need to operate the speaker in the 100-120 V range:
1. Disconnect all connections, including the power supply connection.
2. Wait 5 minutes.
3. Replace the fuse with the fuse rated for the 100-120 V range, which is included in the
package.
• Use the SERVICE DATA USB port to update product firmware only. Do not connect
any USB devices to the unit to avoid damage or malfunctioning.
• Do not use the speaker for long periods of time when the Limiter LED is on or
blinking, as this indicates that the module is operating under exceeding stress
under distortion conditions.
LVX XM15 Cod. 420120241 REV.1.0
27