Dimensions; Installation Example; Assembly Instructions (70-1306 10 36); Assembly Instructions (70-1316 10 36) - Franke FAID100 Notice De Montage Et De Mise En Service

8.

Dimensions

9.

Installation Example

A: for table installation
B: for wall installation
C: for wall mounting and wall duct

10. Assembly instructions (70-1306 10 36)

☞
Important!
• Before installing, flush the pipes in compliance with DIN 1988.
• Attach the emergency shower according to EN 15154 part 2.
10.1 Insert the table mounting (a) with O-ring in the table plate (b).
10.2 Tighten the nut (c).
10.3 Put the eye-wash fountain with hose and seal in the table mounting.
10.4 Install the appropriate water connection (d) for the union nut G 3/8. The water
connection must be installed by the customer.
☞
Important!
The filter (e) contains the connection seal.
☞
Ensure that the filter is positioned correctly.

11. Assembly instructions (70-1316 10 36)

☞
Important!
• Before installing, flush the pipes in compliance with DIN 1988.
• Attach the emergency shower according to EN 15154 part 2.
11.1 Mark the drill holes.
a: 700±50 mm above the floor
11.2 Drill according to the markings.
11.3 Insert the dowels.
11.4 Attach the wall mounting with the screws.
11.5 Put the eye-wash fountain mounted with the hose and seal in the wall mounting.
11.6 The grip bar (b) must point to the front.
11.7 Install the appropriate water connection (c) for the union nut G 3/8. The water
connection must be installed by the customer.
6