Télécharger Imprimer la page

König HAV-TRHP20KN Mode D'emploi page 5

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Step 2:
Select a channel with the channel switch at the back of the transmitter. Adjust the headphones
reception by pressing the AUTO TUNE button at the left shell of the headphones.
Note: When using the headphones at a maximum volume level, the batteries will run empty in a
shorter time. It will also increase the possibility of hearing noise due to the wireless connection.
Therefore it is recommended to increase the volume level of the audio providing appliance and
decrease the volume level of the headphones. This will improve the performance of the wireless
headphones.
Specifications:
 Transmission frequency:
 Frequency response:
 S/N ratio:
 Range:
 Power supply:
 Batteries:
 Charging time:
 Playing time:
Safety precautions:
To reduce risk of electric shock, this product should ONLY be opened by an authorized technician
when service is required. Disconnect the product from mains and other equipment if a problem should
occur. Do not expose the product to water or moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.
Note: if the sound is poor, change to a
different channel on the transmitter and
press the AUTO TUNE button once more.
863 MHz
20 - 20.000Hz
54 dB
100 m (open area), 30 m (indoors)
12 V DC, 200 mA
2 x AAA, NiMH, 650 mAh (included)
± 10hrs
± 15hrs
5

Publicité

loading